Siemens XDACT-ASSY Installation Instructions

Download this manual

INSTALLATION INSTRUCTIONS

Model XDACT-ASSY

Assembly

INTRODUCTION

The Model XDACT-ASSY is an optional assembly that can be mounted on the inner doors next to a

PMI-2 or a PMI-3, or in the second row of inner doors of CAB2 and CAB3.

Parts Supplied:

1) Dialer bracket, q'ty = 1

2) Locknuts, q'ty = 2

3) Cable harness, q'ty = 1

4) 2-pos connector plug, q'ty = 1

5) Instruction sheet

DIALER

BRACKET

CABLE

HARNESS

2-POS

CONNECTOR

PLUG

Figure 1 – Mounting the Dialer

A6V10807278_enUS_b

LOCKNUTS

(2) REQ'D

DIALER

MODEL FCA2015-U1

Building Technologies Division

PMI REAR

COVER

INNER DOOR

Siemens Industry, Inc.

Page 1 Model XDACT-ASSY Assembly INTRODUCTION The Model XDACT-ASSY is an optional assembly that can be mounted on the inner doors next to a PMI-2 or a PMI-3, or in the second row of inner doors of CAB2 and CAB3. Parts Supplied: 1) Dialer bracket, q’ty = 1...
Page 2 12-22 AWG 12-22 AWG BLACK POSITION 2 POSITION 2 2-POS CONNECTOR PLUG POWER DIALER PSC-12 FCA2015-U1 X102 Figure 2 – Power Connection to Dialer INSTALLATION 1. Remove all system power before installation, first battery then AC. To power up, connect the AC first, then the battery.
Page 3 Cyber security disclaimer Siemens products and solutions provide security functions to ensure the secure operation of building comfort, fire safety, security management and physical security systems. The security functions on these products and solutions are important components of a comprehensive security concept.
Page 4 Document ID A6V10807278_enUS_b P/N A5Q00069411...