Verifying PVLAN (Isolated) Configurations on FEX HIF
Verifying PVLAN (Isolated) Configurations on FEX HIF
SUMMARY STEPS
1. Display the PVLAN operational status.
DETAILED STEPS
Display the PVLAN operational status.
switch# show vlan private-vlan
Example
switch# show vlan private-vlan
Primary
550
Verifying the Private VLAN Configuration
To display private VLAN configuration information, perform one of the following tasks:
Command
show running-config vlan vlan-id
show vlan private-vlan [type]
show interface private-vlan mapping
show interface vlan primary-vlan-id private-vlan mapping
show interface switchport
For detailed information about the fields in the output from these commands, see the Cisco Nexus 7000 Series
NX-OS Layer 2 Switching Command Reference.
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
84
Secondary
Type
-------
---------
551
isolated
Ports
---------------
Eth100/1/13
Configuring Private VLANs Using NX-OS
Purpose
Displays VLAN information.
Displays information on private
VLANs.
Displays information on interfaces
for private VLAN mapping.
Displays information on interfaces
for private VLAN mapping.
Displays information on all
interfaces configured as switch
ports.