Verifying The Queue And Flow Control Configurations - Cisco Nexus 5000 NX-OS Service Configuration Manual

Configuring Queuing and Flow Control
This example shows how to disable slow port pruning on a Cisco Nexus 5548 switch:
switch(config)# hardware multicast disable-slow-port-pruning
switch(config)#

Verifying the Queue and Flow Control Configurations

Use one of the following commands to verify the configuration:
Command
show queuing interface [interface slot/\port]
show interface flowcontrol [module numbef ]
show interface [interface slot/port]
priority-flow-control [module number]
show wrr-queue cos-map [var]
running-config ipqos
startup-config ipqos
OL-26657-01
Cisco Nexus 5000 NX-OS Quality of Service Configuration Guide, Release 5.1(3)N2(1)
Verifying the Queue and Flow Control Configurations
Purpose
Displays the queue configuration and statistics.
Displays the detailed listing of the flow control
settings on all interfaces.
Displays the priority flow control details for a
specified interface.
Displays information about the running configuration
for QoS.
Displays informationa bout the startup configuration
for QoS.
67