Applying Special Effects (Lighting/Recursive Effects); Lighting Settings - Sony XKS-C9111 User Manual

Applying Special Effects
(Lighting/Recursive
Effects)

Lighting Settings

You can specify the intensity and color of the light and the
lighting pattern. The following lighting patterns are
available:
Plane: Illumination of the entire screen.
Bar: Bar illumination. You can specify the width and
angle of the bar, and its softness.
Preset: Lighting pattern suitable for nonlinear effects.
When [Bar] is selected, the following modes can be
selected.
Normal: Emphasizes the bar highlight area.
Specular: Creates an effect like light striking a surface
with metallic reflections.
Mat: Creates an effect like light striking paper, cloth, or
another diffusively reflective surface.
Note
When the signal format is 3840×2160P 2SI or 1080P and
the following nonlinear effects are used on one channel,
the [Preset] setting of the lighting pattern is disabled.
Page Turn, Roll, Cylinder, Sphere
Applying the Lighting effect
1
Open the DME >Light/Trail >Lighting menu (4151).
2
Press [Lighting], turning it on.
3
In the <Light Pattern> group, select the lighting
pattern (Plane, Bar or Preset).
4
Set the following parameters, according to the selected
pattern.
You can make the Lighting effect more effective by
adjusting the [Total Ambient] parameter to lower the
brightness of the entire image.
The [Total Ambient] setting is common to the
Spotlighting function.
When [Plane] is selected
No. Parameter Adjustment
1 Light Intensity of light in highlight area
5 Total Brightness of whole image
Ambient
When [Bar] is selected
No. Parameter Adjustment
1 Light
2 Ambient
5 Total
Ambient
When [Preset] is selected
No. Parameter Adjustment
1 Light
2 Ambient
a)
3 Shade
5 Total
Ambient
a) Setting is available for Page Turn, Roll, Cylinder, and Sphere
nonlinear effects.
Shade
area
Highlight
area
Setting the bar shape of the highlight area
When [Bar] or [Preset] is selected in step 3 of "Applying
the Lighting effect" (page 261), set the bar shape.
1
In the DME >Light/Trail >Lighting menu (4151),
press [Light Modify].
2
Set the following parameters.
No. Parameter Adjustment
1 X
a)
2 Y
a)
3 Angle
4 Width
5 Soft
a) There are some nonlinear effects for which this cannot be set.
261
Intensity of light in highlight area
Intensity of light in ambient area
Brightness of whole image
Intensity of light in highlight area
Intensity of light in ambient area
Intensity of light in shade area
Brightness of whole image
Ambient
area
X-value of bar center point
Y-value of bar center point
Angle of bar
Width of bar
Softness of boundary