Vrrp Statistics - Cisco 350XG series Administration Manual

IP Configuration: VRRP
Configuring VRRP
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
Source IP Address—IP address to be used in VRRP messages.

VRRP Statistics

To view VRRP statistics and to clear interface counters:
Click IP Configuration > IPv4 Management and Interfaces > VRRP> VRRP
Statistics.
The following fields are displayed for every interface on which VRRP is enabled:
• Interface—Displays the interface on which VRRP is enabled.
• Invalid Checksum—Displays number of packets with invalid checksums.
• Invalid Packet Length—Displays number of packets with invalid packet
lengths.
• Invalid TTL—Displays number of packets with invalid time-to-live values.
• Invalid VRRP Packet Type—Displays number of packets with invalid VRRP
packet types.
• Invalid VRRP ID—Displays number of packets with invalid VRRP IDs.
• Invalid Protocol Number—Displays number of packets with invalid protocol
numbers.
• Invalid IP List—Displays number of packets with invalid IP lists.
• Invalid Interval—Displays number of packets with invalid intervals.
• Invalid Authentication—Displays number of packets that failed
authentication.
Select an interface.
Click Clear Interface Counter to clear the counters for that interface.
Click Clear All Interface Counters to clear all the counters.
18
387