Cisco 350XG series Administration Manual page 224

Smartport
Built-in Smartport Macros
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
#
the port
#Default Values are
#$native_vlan = Default VLAN
#$max_hosts = 10
#
#the port type cannot be detected automatically
#
#the default mode is trunk
smartport switchport trunk native vlan $native_vlan
#
port security max $max_hosts
port security mode max-addresses
port security discard trap 60
#
smartport storm-control broadcast level 10
smartport storm-control include-multicast
smartport storm-control broadcast enable
#
spanning-tree portfast
#
@
no_host
[no_host]
#macro description No host
#
no smartport switchport trunk native vlan
smartport switchport trunk allowed vlan remove all
#
no port security
no port security mode
no port security max
#
no smartport storm-control broadcast enable
no smartport storm-control broadcast level
no smartport storm-control include-multicast
#
spanning-tree portfast auto
#
@
ip_camera
[ip_camera]
#macro description ip_camera
#macro keywords $native_vlan
#
#macro key description:
configured on the port
$max_hosts: The maximum number of allowed devices on
$native_vlan: The untag VLAN which will be
11
215