Cisco 350XG series Administration Manual page 88

Administration: File Management
File Operations
STEP 1
STEP 2
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
To update a system configuration file using TFTP:
Click Administration > File Management > File Operations.
Enter the following fields:
• Operation Type—Select Update.
• Destination File Type—Select one of the configuration file types to update.
• Copy Method—Select TFTP.
• Server Definition—Select whether to specify the TFTP server by IP
address or by domain name.
If Server Definition is By Address:
- IP Version—Select whether an IPv4 or an IPv6 address is used.
- If the server is selected by name in the Server Definition, there is no need
to select the IP Version related options.
- IPv6 Address Type—Select the IPv6 address type (if used). The options
are:
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
- Link Local Interface—Select the link local interface from the list.
• Server IP Address/Name—Enter the IP address or name of the TFTP
server.
• Source File Name—Enter the update file name.
Click Apply to begin the operation.
6
83