Qos Advanced Mode - Cisco 350XG series Administration Manual

Quality of Service

QoS Advanced Mode

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
QoS Advanced Mode
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
To enter QoS settings per interface:
Click Quality of Service > QoS Basic Mode > Interface Settings.
Select Port or LAG to display the list of ports or LAGs.
QoS State displays whether QoS is enabled on the interface.
Select an interface, and click Edit.
Select the Port or LAG interface.
Click to enable or disable QoS State for this interface.
Click Apply. The Running Configuration file is updated.
This section covers the following topics:
• Overview
• Global Settings
• Out-of-Profile DSCP Mapping
• Class Mapping
• Aggregate Policer
• Policy Table
• Policy Class Maps
• Policy Binding
Overview
Frames that match an ACL and were permitted entrance are implicitly labeled with
the name of the ACL that permitted their entrance. Advanced mode QoS actions
can then be applied to these flows.
In QoS advanced mode, the device uses policies to support per flow QoS. A
policy and its components have the following characteristics and relationships:
26
572