Table of Contents
Advertisement
IP Configuration
Domain Name System
STEP 4
STEP 5
STEP 6
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
•
Polling Interval—Enter how often (in seconds) the device sends DNS query
packets after the number of retries has been exhausted.
-
Use Default—Select to use the default value.
This value = 2*(Polling Retries + 1)* Polling Timeout
-
User Defined—Select to enter a user-defined value.
•
Default Parameters—Enter the following default parameters:
-
Default Domain Name—Enter the DNS domain name used to complete
unqualified host names. The device appends this to all non-fully qualified
domain names (NFQDNs) turning them into FQDNs.
Do not include the initial period that separates an unqualified name
NOTE
from the domain name (like cisco.com).
-
DHCP Domain Search List—Click Details to view the list of DNS servers
configured on the device.
Click Apply. The Running Configuration file is updated.
The DNS Server Table displays the following information for each DNS server
configured:
•
DNS Server—The IP address of the DNS server.
•
Preference—Each server has a preference value, a lower value means a
higher chance of being used.
•
Source—Source of the server's IP address (static or DHCPv4 or DHCPv6)
•
Interface—Interface of the server's IP address.
Up to eight DNS servers can be defined. To add a DNS server, click Add.
Enter the parameters.
•
IP Version—Select Version 6 for IPv6 or Version 4 for IPv4.
•
IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The
options are:
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
16
363
Hide quick links:
Advertisement
Table of Contents
