Chapter 1: Getting Started; Starting The Web-Based Configuration Utility - Cisco 350XG series Administration Manual

Getting Started

Starting the Web-based Configuration Utility

Cisco 350XG & 550XG Series 10G Stackable Managed Switches
This section provides an introduction to the web-based configuration utility, and
covers the following topics:
• Starting the Web-based Configuration Utility
• Out-Of-Band Port
• Basic or Advanced Display Mode
• Quick Start Device Configuration
• Interface Naming Conventions
• Window Navigation
This section describes how to navigate the web-based switch configuration utility.
If you are using a pop-up blocker, make sure it is disabled.
Browser Restrictions
If you are using IPv6 interfaces on your management station, use the IPv6 global
address and not the IPv6 link local address to access the device from your
browser.
1
10