Cisco 350XG series Administration Manual page 141

Administration: Discovery
Configuring LLDP
STEP 1
STEP 2
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
To define the LLDP port settings:
Click Administration > Discovery - LLDP > LLDP Port Settings.
This page contains the port LLDP information.
Select a port and click Edit.
This page provides the following fields:
• Interface—Select the port to edit (including the OOB port).
• Administrative Status—Select the LLDP publishing option for the port. The
values are:
- Tx Only—Publishes but does not discover.
- Rx Only—Discovers but does not publish.
- Tx & Rx—Publishes and discovers.
- Disable—Indicates that LLDP is disabled on the port.
• SNMP Notification—Select Enable to send notifications to SNMP
notification recipients; for example, an SNMP managing system, when there
is a topology change.
The time interval between notifications is entered in the Topology Change
SNMP Notification Interval field in the
Notification Recipients by using the
• Selected Optional TLVs—Select the information to be published by the
device by moving the TLV from the Available Optional TLVs list. The
available TLVs contain the following information:
- Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
- System Name—System's assigned name (in alpha-numeric format). The
value equals the sysName object.
- System Description—Description of the network entity (in alpha-
numeric format). This includes the system's name and versions of the
hardware, operating system, and networking software supported by the
device. The value equals the sysDescr object.
LLDP Properties page. Define SNMP
SNMPv1,2 Notification
9
Recipients.
132