Table of Contents
Advertisement
Security: SSH Client
Change User Password on the SSH Server
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
-
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface—Select the link local interface from the list of
interfaces.
•
Server IP Address/Name—Enter either the IP address of the SSH server or
its name, depending on what was selected in Server Definition.
•
Username—This must match the username on the server.
•
Old Password—This must match the password on the server.
•
New Password—Enter the new password and confirm it in the Confirm
Password field.
Click Apply. The password on the SSH server is modified.
23
498
Hide quick links:
Advertisement
Table of Contents
