Cisco 350XG series Administration Manual page 197

Port Management
Green Ethernet
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
802.3az EEE Configuration Workflow
This section describes how to configure the 802.3az EEE feature and view its
counters.
Ensure that auto-negotiation is enabled on the port by opening the Port
Management > Port Settings page.
a. Select a port and open the Edit Port Setting page.
b. Select Auto Negotiation field to ensure that it is Enabled.
Ensure that 802.3 Energy Efficient Ethernet (EEE) is globally enabled in the
Properties page (it is enabled by default). This page also displays how much
energy has been saved.
Ensure that 802.3az EEE is enabled on a port by opening the
a. Select a port, open the Edit Port Setting page.
b. Check the 802.3 Energy Efficient Ethernet (EEE) mode on the port (it is enabled
by default).
c. Select whether to enable or disable advertisement of 802.3az EEE capabilities
through LLDP in 802.3 Energy Efficient Ethernet (EEE) LLDP (it is enabled by
default).
To see 802.3 EEE-related information on the local device, open the
LLDP Local Information page, and view the information in the 802.3 Energy
Efficient Ethernet (EEE) block.
To display 802.3az EEE information on the remote device, open the LLDP Neighbor
Information pages, and view the information in the 802.3 Energy Efficient Ethernet
(EEE) block.
Properties
The Properties page displays and enables configuration of the Green Ethernet
mode for the device. It also displays the current power savings.
To enable Green Ethernet and EEE and view power savings:
Click Port Management > Green Ethernet > Properties.
Enter the values for the following fields:
• Energy Detect Mode—Disabled by default. Click the checkbox to enable.
10
Port Settings page.
188