Cisco 350XG series Administration Manual page 313

10g stackable managed switches
Table of Contents

Advertisement

Multicast
IPv6 Multicast Configuration
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
-
Use Global—Use the status set in the global block.
-
Disable—This disables forwarding of IPv6 Multicast traffic from
downstream interfaces.
-
Enable—This enables forwarding from downstream interfaces.
The following fields are displayed for each IP Multicast route:
Source Address—Unicast source IPv4 address.
Group Address—Multicast destination IPv4 address.
Incoming Interface—Expected interface for a Multicast packet from the
source. If the packet is not received on this interface, it is discarded.
Outgoing Interfaces—Interfaces through which packets will be forwarded.
Uptime—Length of time in hours, minutes, and seconds that the entry has
been in the IP Multicast routing table.
Expiry Time—Length of time in hours, minutes, and seconds until the entry
is removed from the IP Multicast routing table.
15
302

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

550xg series

Table of Contents