Common Tasks - Cisco 350XG series Administration Manual

Security: SSH Server

Common Tasks

Common Tasks
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
This section describes some common tasks performed using the SSH Server
feature.
Workflow1: Create an SSH session with no SSH user authentication,
perform the following:
Enable SSH server in the
Disable SSH user authentication by password and by public key in the
Authentication page.
Establish SSH sessions to the device from a SSH client application such as
PUTTY.
Workflow2: To create an SSH session with SSH user authentication by
password, perform the following steps:
Enable SSH server in the
Enable SSH User authentication by password in the
page.
Establish SSH sessions to the device from a SSH client application such as
PUTTY.
Workflow3: Create an SSH session with SSH user authentication by
public key with/without bypassing management authentication, perform
the following steps:
Enable SSH server in the
Enable SSH User authentication by public key in the
page. The public key must have already been created at the SSH client and will
be used by the SSH client to establish a SSH session to the SSH server on the
device.
Enable Automatic Login by passing management authentication if required in the
SSH User Authentication
Add the users and their public key into to SSH User Authentication Table in the
SSH User Authentication
TCP/UDP Services page.
TCP/UDP Services page.
TCP/UDP Services page.
page.
page.
22
SSH User
SSH User Authentication
SSH User Authentication
484