Password Strength - Cisco 350XG series Administration Manual

Security

Password Strength

Password Strength
STEP 1
STEP 2
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
The default username/password is cisco/cisco. The first time that you log in with
the default username and password, you are required to enter a new password.
Password complexity is enabled by default. If the password that you choose is not
complex enough (Password Complexity Settings are enabled in the Password
Strength page), you are prompted to create another password.
See User Accounts
Since passwords are used to authenticate users accessing the device, simple
passwords are potential security hazards. Therefore, password complexity
requirements are enforced by default and may be configured as necessary.
To define password complexity rules:
Click Security > Password Strength.
Enter the following aging parameters for passwords:
• Password Aging—If selected, the user is prompted to change the password
when the Password Aging Time expires.
• Password Aging Time—Enter the number of days that can elapse before
the user is prompted to change the password.
Password aging also applies to zero-length passwords (no
NOTE
password).
Select Password Complexity Settings to enable complexity rules for passwords.
If password complexity is enabled, new passwords must conform to the following
default settings:
• Have a minimum length of eight characters.
• Contain characters from at least three character classes (uppercase letters,
lowercase letters, numbers, and special characters available on a standard
keyboard).
• Are different from the current password.
• Contain no character that is repeated more than three times consecutively.
• Do not repeat or reverse the users name or any variant reached by changing
the case of the characters.
on how to create a user account.
19
399