Administration: File Management
Firmware Operations
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
Enter the following fields:
•
Operation Type—Select Update Firmware or Backup Firmware.
•
Copy Method—Select HTTP/HTTPS or USB.
•
File Name—Enter the name of the file to be updated (not relevant for Backup
by HTTP/HTTPS).
Click Apply.
Click Reboot.
To update or backup firmware using TFTP:
Click Administration > File Management > Firmware Operations.
The following fields are displayed:
•
Active Firmware File—Displays the current, active firmware file.
•
Active Firmware Version—Displays the version of the current, active
firmware file.
Enter the following fields:
•
Operation Type—Select Update Firmware or Backup Firmware.
•
Copy Method—Select TFTP.
•
Server Definition—Select whether to specify the TFTP server By IP
address or By name.
If Server Definition is By Address:
•
IP Version—(If Server Definition is By Address) Select whether an IPv4 or an
IPv6 address for the server is used.
•
IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The
options are:
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
6
78