Pepperl+Fuchs HD2-GTR-4PA Manual page 42

Operation
Device Diagnosis
Parameters
Gateway primary de-
vice
Redundancy not ope-
rative
Redundancy is
syncronizing
Redundancy gateway
missing
Hardware error
detected
Redundancy link
error
No baudrate detected Yes
BuiltIn-Slave
not in data exchange
Firmware version
mismatch
Firmware updated,
need reboot
A PA Masters not in
token ring
PABus parameters
write locked
Segment MAU error
ADM error
or module missing
ADM: system mainte-
nance required
ADM: system out of
specification
ADM: segment
maintenance requi-
red
ADM: segment out of
specification
All Device Diagnostic parameters marked with „Yes" in the EXT_DIAG
column cause the EXT_DIAG to be set in the slave diagnosis. The Pro-
cess Control System then marks that slave as defective.
Subject to reasonable modifications due to technical advances.
42
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
EXT_DIAG
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
H S
U B E G M E N T
InputData
GOOD
BAD
BAD
BAD
BAD
BAD
BAD
GOOD
BAD
BAD
BAD
GOOD
BAD
BAD
GOOD Maintenance
required
BAD
GOOD Maintenance
required
BAD
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R