Pa Segment Parameters; Diagnostic Parameters; Device Diagnostic Parameters - Pepperl+Fuchs HD2-GTR-4PA Manual

Parameter Reference List
10.1.2

PA Segment Parameters

Name
TAG
Number of nodes
PA bus cycle time
10.2

Diagnostic Parameters

Diagnostic parameters represent the current status of the device/seg-
ment as a bit field.

Device Diagnostic Parameters

10.2.1
Bit Description
0 0: Backup device
1: Gateway is primary redundant device
(always with non-redundant layout)
1 Redundancy status (only with redundant layout):
0: OK
1: Redundancy not operative
2 Synchronization status (only with redundant layout)
0: OK
1: Redundancy is synchronizing
3 Redundancy device status (only with redundant layout)
0: OK
1: Redundancy gateway missing
4 Hardware error status
0: OK
1:Hardware error detected
5 Redundancy communication status (only with redundant layout)
0: OK
1: Redundancy link error
6 DP baudrate status
0: OK
1: No baudrate detected
7 Built-In slave status
0: OK
1: Built-in slave not in Data-Exchange state
8 Firmware versions in both gateways differ
0: False
1: True
Subject to reasonable modifications due to technical advances.
70
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
Description
Segment TAG; Default EMPTY
Number of devices on this segment (Masters +
slaves)
Value of the last PA bus cycle time in ms
H S
U B E G M E N T
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R