Create The Project Tree; Installation Of Dtm Package With Pact - Pepperl+Fuchs HD2-GTR-4PA Manual

PROFIBUS Commissioning
• 40 MB free hard drive storage


Installation of DTM Package with PACT

To install the DTM package on your system, follow these steps:
1. Install the P+F-FieldConnex
2. Start the PACT
Make sure that all PACT
Note
3. Update the device catalog
•
The Create New Device Catalog window appears:
•
4. Confirm with YES
The DTM is installed and ready for operation.


Create the project tree

To create the project tree, proceed as follows:
1. Start PACT
Make sure the latest DTM version is installed and that the device catalog
is updated.
Note
2. Open the appropriate project or create a new one
3. Open the device catalog (View/Device Catalog or press F3)
Subject to reasonable modifications due to technical advances.
36
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
R
TM
program
ware
TM
projects are closed.
ware
TM
ware
H S
U B E G M E N T
TM
as an Example
ware
DTM package
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R