Connecting The Ground Connection Cable - Pepperl+Fuchs HD2-GTR-4PA Manual

Installation and Commissioning


Connecting the ground connection cable

1. Connect the ground cable to a cable lug.
2. Position the cable lug over the ground connection clamp so that
the cable points downwards.
3. Screw the cable lug to the ground connection clamp using two too-
thed lock washers.
4. Tighten the screw so that the cable lug can not move.
•
1 Screw
2 Toothed lock washer
3 Cable lug
4 Ground connection clamp on motherboard
Subject to reasonable modifications due to technical advances.
24
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
H S
U B E G M E N T
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R
1
2
3
2
4