Specification
2.5.3
Case 3: Simplex
In the simplex system, both the coupling of DP to PA and the supply of
the four segments are single (simplex). The simplex system consists of
the following components:
•
Gateway motherboard MB-FB-GT
•
Power Hub motherboard MB-FB-4.GEN
•
1 x HD2-GTR-4PA
•
4 x Power Modules
•
1 x Diagnostic Module
•
1 x Sub-D cable to connect motherboards
Combining a simplex Gateway Motherboard and a redundant Power Hub
Motherboard also makes a fourth combination possible. Pepperl+Fuchs
does not recommend using this arrangement. Since a fault in the cou-
pling of DP to PA results in failure of all four segments together, but the
Note
failure of a single segment does not have any effect on the remaining
segments, increased segment availability can be achieved most easily
with redundant coupling (as described in case 1 and case 2).
Subject to reasonable modifications due to technical advances.
16
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
H
S
U B
E G M E N T
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R