Brief Introduction To Dtm With Pact Ware Tm; As An Example; Connect Dtm To The Hd2-Gtr-4Pa; Tm As An Example - Pepperl+Fuchs HD2-GTR-4PA Manual

Operation
In the Offline dialog, all parameters can be set locally without having any
direct effect on communication or the device. Data can be written to the
device after all settings have been made. Current parameters can also
be read in from the device, processed and saved.
Data Loss
•
Settings made in the Online Dialog are not automatically transferred to
the Offline Dialog.
To save online settings, load the data into the
Attention
Offline Dialog (function: Read Data from Device).
In the Online Dialog, you directly effect device parameters. Your entry is
written to the device immediately, as soon as you press the Return key.
The Online Dialog additionally offers diagnostic information about the
Gateway and the PA-segments connected to the Power Hub.
The Diagnostic Dialog shows the current device parameters and
diagnostic information, changes to the data cannot be made in this dia-
log.
•
Offline
dialog
Figure 6.1: Functional overview of dialogs
6.3.1 Brief introduction to DTM with PACT


Connect DTM to the HD2-GTR-4PA

Make sure all settings have been made correctly (the device address,
etc.)
1. Right click in the project tree on HD2-GTR-4PA
2. Select Connect
A rhomb (#) next to the device icon in the project tree indicates that the
connection exists.
Subject to reasonable modifications due to technical advances.
44
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
P R O F I B U S P
O W E R
Diagnosis
dialog
Field device
H S
U B E G M E N T
Online
dialog
TM

as an Example

ware
Copyright Pepperl+Fuchs, Printed in Germany
C
O U P L E R