Segment Supply; System Components; Motherboards - Pepperl+Fuchs HD2-GTR-4PA Manual

Profibus power hub segment coupler
Hide thumbs Also See for HD2-GTR-4PA:
Table of Contents

Advertisement

P R O F I B U S P
O W E R
Cyclic data exchange can be connected redundantly to the DP line by
using the redundant Gateway Motherboard MB-FB-GTR and two
HD2-GTR-4PA Gateways.
The
Gateway
"Flying Redundancy" (chapter "Redundancy Concepts" on page 63) as
well as all non-redundant DP Masters.
In summary, the Gateway is responsible for the following tasks:
Conversion of the PROFIBUS DP physical layout to that of the
PROFIBUS PA
Adjusting the DP transmission rate to the PA transmission rate
Galvanic isolation between PROFIBUS DP and PA
Elementary functional diagnostics via LEDs
Ensuring increased availability through redundant coupling of
cyclic data exchange (with redundant layout)
Acyclic Parameterization of Gateway parameters by
FDT/DTM
Redundancy diagnostics (with redundant layout)
2.3

Segment Supply

Power is supplied to the field devices through Power Hub Modules on a
Power Hub Motherboard (simplex: 4 Power Hub connection slots, red-
undant: 8 connection slots) and via bus lines to the individual segments.
PA segments can receive redundant power supply if the redundant Po-
wer Hub Motherboard is used along with two Power Hub Modules for
each segment.
In summary, the supply is responsible for the following tasks:
Power supply of field devices: power and communication signal
Redundant supply for high system availability
Elementary diagnostic information via LEDs
Advanced Physical Layer Diagnostics via the HD2-DM* Diagno-
stic Module and the FDT/DTM software package (see corre-
sponding documentation).
2.4

System Components

2.4.1

Motherboards

Gateway motherboard simplex MB-FB-GT
The gateway motherboard simplex MB-FB-GT allows the connection of
the Fieldbus Power Hub motherboards MB-FB*.GEN or MBHD-
FB*.GEN using a standard cable. A socket will hold the DP/PA Gateway
HD2-GTR-4PA. The Built-In Slave of the HD2-GTR-4PA can be addres-
sed using the DIP switch on the motherboard.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
H
S
U B
E G M E N T
Module
HD2-GTR-4PA
C
O U P L E R
supports
Copyright Pepperl+Fuchs, Printed in Germany
Specification
PROFIBUS
13

Advertisement

Table of Contents
loading

Table of Contents