Cisco 8821 Administration Manual page 81

Configuration on the Phone
Procedure
Step 1 From the phone administration web page, select WLAN.
Step 2 Set the fields as described in the following table.
Field Name
Source
Status
Profile
User modifiable
WLAN configuration
SSID
Security mode
WEP key
Passphrase
User ID
Password
802.11 mode
On call power save
Network configuration
Domain name
IPv4
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
Set Up the Phone with the Administration Web Page
Description
Read-only field
Use to enable or disable the profile.
Enter the name of the profile.
Set the field to enable or disable the user from
changing their WLAN profile.
Enter the SSID of the access point.
Select a security mode.
When the security type is set to WEP, the screen
changes to display the WEP key field. enter a 40/104
or 64/128 ASCII or Hex WEP key.
When the security type is set to PSK, the screen
changes to display the Passphrase field. Enter an
8-63 ASCII or 64Hex passphrase.
When the security type is EAP-Fast, PEAP-GTC, or
PEAP-MSCHAPV2, the screen changes to display
the User ID field. Enter the id of the user.
When the security type is EAP-Fast, PEAP-GTC, or
PEAP-MSCHAPV2, the screen changes to display
the Password field. Enter a password.
Select the mode required.
Select the type of power save mode that the phone
uses to save power.
Enter the domain name.
71