Set Up User Access To The Self Care Portal; Customize The Self Care Portal Display; Custom Wallpaper And Ringtones - Cisco 8821 Administration Manual

Cisco Unified Communications Manager Phone Configuration
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.

Set Up User Access to the Self Care Portal

Before a user can access the Self Care Portal, you need to authorize the access.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select User Management > End User.
Step 2 Search for the user.
Step 3
Click the user ID link.
Step 4 Ensure that the user has a password and PIN configured.
Step 5 In the Permission Information section, ensure that the Groups list includes Standard CCM End Users.
Step 6 Select Save.

Customize the Self Care Portal Display

Most options display on the Self Care Portal. However, you must set the following options by using Enterprise
Parameters Configuration settings in Cisco Unified Communications Manager Administration:
• Show Ring Settings
• Show Line Label Settings
The settings apply to all Self Care Portal pages at your site.
Note
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select System > Enterprise Parameters.
Step 2 In the Self Care Portal area, set the Self Care Portal Default Server field.
Step 3 Enable or disable the parameters that the users can access in the portal.
Step 4 Select Save.

Custom Wallpaper and Ringtones

You can add custom wallpaper and ringtones to the phones. For example, you might want a wallpaper with
your corporate logo.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
Set Up User Access to the Self Care Portal
59