Add The Phone To The Wi-Fi Network - Cisco 8821 Administration Manual

Add the Phone to the Wi-Fi Network

c) Press More
Step 5 Select Network configuration > IPv4 Setup.
Step 6 Select DHCP and press Off.
Step 7 Enter an IP address for the phone.
a) Select IP address.
b) Press the Navigation ring down and press Select to enter edit mode.
c) Enter the IP address.
d) Press Save.
Step 8 Enter a subnet mask.
a) Select Subnet mask.
b) Press the Navigation ring down and press Select to enter edit mode.
c) Enter the mask.
d) Press Save.
Step 9 Enter a default router.
a) Select Subnet mask.
b) Press the Navigation ring down and press Select to enter edit mode.
c) Enter the mask.
d) Press Save.
Step 10 Enter the primary DNS server.
a) Select DNS server 1.
b) Press the Navigation ring down and press Select to enter edit mode.
c) Enter the IP address of the DNS server.
d) Press Save.
Step 11 Enter the primary TFTP server
a) Select TFTP server 1.
b) Press the Navigation ring down and press Select to enter edit mode.
c) Enter the IP address of the TFTP server for your Cisco Unified Communications Manager.
d) Press Save.
Step 12 Press Erase at the Trust list prompt.
When you select Erase, the CTL and ITL files are removed from the phone. If you select Continue, the files
remain but you may not be able to connect to the new Cisco Unified Communications Manager.
Related Topics
Reset the Network Settings, on page 106

Add the Phone to the Wi-Fi Network

When you enter an IP address, scroll to the field, and press Select. The field changes from one field into input
boxes. You use the keypad to enter the digits and the navigation ring to move between the fields.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
66
and select Save.
Configuration on the Phone