Set Up Phone With The Usb Dongle And The Desktop Charger - Cisco 8821 Administration Manual

Set Up Phone with the USB Dongle and the Desktop Charger

For more information, see your SCEP server documentation.

Set Up Phone with the USB Dongle and the Desktop Charger

A USB to Ethernet adapter (dongle) can be inserted into the desktop charger to connect to an Ethernet network
for automatic Wi-Fi profile provisioning and certificate enrollment purposes only. Voice calls over the Ethernet
network are not supported.
The USB Dongle is not intended to be connected to the desktop charger for day-to-day use. It is intended
Note
to be only used for initial provisioning purposes.
The native VLAN of the switch port to be used for provisioning must have connectivity to the Cisco Unified
Communications Manager and must offer DHCP option 150 pointing it to the Cisco Unified Communications
Manager.
The supported USB to Ethernet adapters are:
• Apple USB 2.0 Ethernet Adapter
• Belkin B2B048 USB 3.0 Gigabit Ethernet Adapter
• D-Link DUB-E100 USB 2.0 Fast Ethernet Adapter
• Linksys USB300M USB 2.0 Ethernet Adapter
• Linksys USB3GIG USB 3.0 Gigabit Ethernet Adapter
Before You Begin
You need a USB to Ethernet adapter (dongle).
The desktop charger must be connected to the power source using the power adapter.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, check that the WLAN Profile you created is
associated to either the correct CUCM device pool (System > Device Pool), or associated with the wireless
phone (Device > Phone).
Step 2 Connect one end of the dongle into the desktop charger and the other end to an RJ-45 cable connected to the
network switch.
Step 3
Put the phone into the desktop charger and wait while the profile downloads.
Step 4 Check that the phone registers to the Cisco Unified Communications Manager.
Step 5 Remove the phone from the desktop charger.
Step 6 Disconnect the dongle from the desktop charger.
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
76
Configuration on the Phone