Cisco 8821 Administration Manual page 61

Cisco Unified Communications Manager Phone Configuration
Field Name Field Type
Or Choices
Remote Log Disabled
Enabled
Log Profile Default
Preset
Telephony
Log Server String of up to 256
characters
IPv6 Log Server String of up to 256
characters
Cisco Discovery Disabled
Protocol (CDP)
Enabled
SSH Access Disabled
Enabled
Ring Locale Default
Japan
TLS Resumption Timer
Integer 0–3600 seconds
FIPS Mode Disabled
Enabled
Record Call Log from Disabled
Shared Line
Enabled
Minimum Ring Volume Silent
Volume level 1–15
Load Server String of up to 256
characters
IPv6 Load Server String of up to 256
characters
Default
Disabled
Preset
Enabled
Disabled
Default
3600
Disabled
Disabled
Silent
Cisco Wireless IP Phone 8821 and 8821-EX Administration Guide for Cisco Unified Communications Manager
Product Specific Configuration Fields
Description
Controls the ability to capture logs remotely.
Specifies the predefined logging profile.
Identifies the IPv4 log server.
Identifies the IPv6 log server.
Not currently supported.
Controls Cisco Discovery Protocol on the phone.
Not currently supported.
Controls the access to the SSH daemon through port
22. Leaving port 22 open leaves the phone vulnerable
to Denial of Service (DoS) attacks.
Controls the ringing pattern.
Controls the ability to resume a TLS session without
repeating the entire TLS authentication process. If the
field is set to 0, then the TLS session resumption is
disabled.
Enables or disables the Federal Information Processing
Standards (FIPS) mode on the phone.
Specifies whether to record call log from a shared line.
Controls the minimum ring volume for the phone.
Identifies the alternate IPv4 server that the phone uses
to obtain firmware loads and upgrades.
Identifies the alternate IPv6 server that the phone uses
to obtain firmware loads and upgrades.
Not currently supported.
51