Avaya 1110 Fundamentals page 451

Configuring parameters manually for GUI
1. Press Auto on the Configuration page to switch to the Auto Provisioning page.
2. Perform one of the following actions:
3. To exit and save, press the Config key to return to the Network Configuration page,
Configuration page for graphical user interface
Press Config on the Auto Provisioning page to access the Configuration page.
For manual configuration steps, see
Avaya 1100 Series IP Deskphones
If you configure parameters for automatic provisioning in the Auto Provision page, the
parameter appears dimmed in the Configuration page.
Auto Provisioning page for text user interface
Table 96: Auto Provisioning page
user interface.
Table 96: Auto Provisioning page
1. EAP Mode
2. LLDP Enable
DHCP
3. Primary DNS IP
Secondary DNS IP
4. Certificate server
5. S1 Port
IP Deskphones Fundamentals
• Press the AllMan soft key to change all parameters to be manually
provisioned.
• Use the dial pad to enter the number associated with the parameter, or use
the navigation keys to scroll and highlight the specific parameter (up/down
navigation takes you from group to group, while left/right navigation takes you
from item to item). Press the Enter key to uncheck the parameter, making it
"Manual" provisioned.
then press Apply.
Press Cancel to exit the Configuration menu without saving the changes. On the
Avaya 1165E IP Deskphone, pressing Cancel returns the display to the
Configuration menu; while on the other GUI-based phones, pressing Cancel exits
the local menu.
Manual provisioning of Avaya 2007 IP Deskphone and
on page 503.
on page 451 shows the Auto Provisioning page for a text
Automatic provisioning
February 2013 451