Avaya 1110 Fundamentals page 43

When you complete the IP Deskphone connection, you must connect the phone to the network.
See Dynamic Host Configuration Protocol
IP Deskphones Fundamentals
Figure 6: POE module
Red LEDs on the 2033 IP Conference Phone indicate power. Messages indicating
system start up, such as Loading, Initializing network, and Loading boot parameters
appear after a short delay.
Figure 7: Bottom view of Avaya 2033 IP Conference Phone
the bottom view of the 2033 IP Conference Phone.
The 2033 IP Conference Phone supports both AC power and Power over LAN
options, including IEEE 802.3af Power Classification 0. To use Power over Ethernet,
where power is delivered over the CAT5-e cable, the LAN must support Power over
Ethernet, and a global power supply is not required. To use local AC power, the
optional global power supply can be ordered separately.
Figure 7: Bottom view of Avaya 2033 IP Conference Phone
on page 373.
Installation and configuration
on page 43 shows
February 2013 43