Avaya 1110 Fundamentals page 381

• Table 79: Configuration string for one Connect Server and an XAS (Text)
• Table 80: Configuration string for one Connect Server and an XAS (Graphical)
page 382
The following conventions are used:
• The Class Identifier is separated from the servers by a comma (,).
• The servers are separated by semi-colons (;).
• The IP address and port numbers are separated by a colon (:).
• The string is terminated with a period (.).
Table 77: Configuration string for one Connect Server
Class Identifier Field
Nortel-i2004-A
Table 78: Configuration string for two Connect Servers
A,iii.jjj.kkk.lll:ppppp,aaa,rrr;iii.jjj.kkk.lll:pppp,aaa,rrr.
Class Identifier Field
Nortel-i2004-A
Table 79: Configuration string for one Connect Server and an XAS (Text)
Nortel-i2004-A,iii.jjj.kkk.lll:ppppp,aaa,rrr;iii.jjj.kkk.lll:
Class Identifier Field
Nortel-i2004-A
Three IP addresses must be specified when using just one Connect Server and XAS. If only
two IP addresses are specified, the IP Deskphone assumes the second IP address is for
the second Connect Server. The IP Deskphone does not recognize that it is for the XAS.
Therefore, a placeholder IP address must be inserted for the second Connect Server in this
situation. The placeholder IP address ensures that the XAS IP address appears as the third
IP Deskphones Fundamentals
Nortel-i2004-A,iii.jjj.kkk.lll:ppppp,aaa,rrr.
Nortel-i2004-
Primary Connect Server
iii.jjj.kkk.lll:ppppp,aa
a,rrr
ppppp,aaa,rrr;iii.jjj.kkk.lll:ppppp
Primary Connect
Server
iii.jjj.kkk.lll:
ppppp,aaa,rrr
Primary Connect Server
iii.jjj.kkk.lll:
ppppp,aaa,rrr
Secondary Connect Server
iii.jjj.kkk.lll:ppppp,aa
Placeholder
Secondary Connect
Server
iii.jjj.kkk.lll: iii.jjj.kkk.lll:
ppppp,aaa,rrr
Network features
on page 381
on
a,rrr
XAS
ppppp
February 2013 381