Avaya 1110 Fundamentals page 356

Features
Note:
Display push is only applicable to the Avaya 1140E, 1150E, 1165E, and 2007 IP
Deskphones.
Optional Push Alert
Display, Top Line, and Audio push messages may be accompanied with an optional alert
level.
The alert value specifies the number of beeps to be generated for the audio alert, which is
played on the handsfree speaker. This alert is intended to draw user attention to the push. If
the alert value number is greater than 3, only 3 ring pings are generated. The default value is
0. The backlight timer is reset when a non-zero alert level is selected. The alert is played only
if the push content is obtained and rendered before execution.
Push Agent information display
The current Push Agent configuration on an IP Deskphone can be accessed through the
phone's local menu under 2. Local Diagnostics -> 1. IP Set Information. The first item shown
in the Push Agent configuration is the Push Agent status which is shown as Enabled or
Disabled, followed by the values of each of the four configuration items. The Push Agent is
considered to be enabled if both of the following conditions are met:
1. The Trusted Push Servers (TPS) parameter is not empty.
2. The Push Capabilities parameter is not equal to 0000 (that is, at least one push type
An example of IP Deskphone information display where the Push Agent is enabled is shown
in the following figure. Some parameter values may not fit in the width of the display; in this
case, the values are wrapped onto following lines
Figure 67: Example of IP Deskphone Push Agent information
Push Agent configuration
Push Agent Port, Capabilities, Trusted Servers and Subscription parameters can be defined
in the provisioning file or can be configured manually using the IP Deskphone's GUI (Avaya
1120E/1140E/1150E/1165E, 2007 IP Deskphone) or text user interface (Avaya 1110 IP
Deskphone, 1200 Series IP Deskphones) in the Network Configuration Dialog.
For information on configuring the Push Agent in the provisioning file, see the Push Agent
parameters in
356 IP Deskphones Fundamentals
is enabled).
Automatic provisioning parameters
Comments? infodev@avaya.com
on page 454.
February 2013