Before You Begin - Avaya 1110 Fundamentals

Avaya 2050 IP Softphone
Avaya Mobile USB Headset Adapter (no headset) (RoHS)
Avaya Enhanced USB Adapter (desktop)
Avaya Enhanced USB Audio (desktop) kit
Avaya Enhanced USB Audio Adapter (no headset)
USB Audio Kit with GNN DuraPlus Monaural Headset (Non-RoHS)
USB Audio kit with GNN DuraPlus Monaural Headset (RoHS)
Handset cord (charcoal) for use with the Avaya Enhanced USB Audio
Adapter Kit

Before you begin

The following section provides a step-by-step guide through the Avaya 2050 IP Softphone
configuration process. Complete the following pre-installation checklist.
Preinstallation checklist
1. Ensure you have the Avaya 2050 IP Softphone application software CD.
2. Ensure you install the Licensing Server.
3. Ensure the host call server is equipped with a Signaling Server that runs the Line
4. Understand the following configuration modes from which you can choose from as
5. A DHCP server and DHCP relay agents, if required, must also be installed,
164 IP Deskphones Fundamentals
Component
Terminal Proxy Server (LTPS) application.
you proceed through the installation of the Avaya 2050 IP Softphone.
• Static IP address—During installation, use the dialpad to enter the IP address,
subnet mask, and default Gateway address. You must also enter the Connect
Server parameters including IP address, port number, action, and retry
count.
• Partial DHCP—During installation, use the dialpad to enter the Connect Server
parameters including: IP address, port number, action, retry count, IP Phone
password, node ID, and TN. Other parameters (IP Phone IP address, subnet
mask, and default Gateway) are obtained from the DHCP server.
configured, and running.
Comments? infodev@avaya.com
Code
NTEX14MAE6
NTEX14AA
NTEX14AB
NTEX14AC
NTEX14ACE6
NTEX14BA
February 2013