Avaya 1110 Fundamentals page 127

Operating parameters
keys 44 to 55 to the second page. The third and fourth LCD Expansion Modules do not have
keys assigned until they are configured in LD 11. An error message alerts the administrator
that the hardware configuration does not match the administered configuration.
If you configure two LCD Expansion Modules in LD 11 but only one LCD Expansion Module
responds, the TPS assigns keys 32 to 55 to the single LCD Expansion Module (using the
Second Page functionality). An error message alerts the administrator that the hardware
configuration does not match the administered configuration. When a second LCD Expansion
Module is detected, the TPS changes the key assignments to display across both LCD
Expansion Modules.
If you configure two LCD Expansion Modules in LD 11 but three LCD Expansion Modules
respond, the TPS assigns the keys 32 to 55 to the first two LCD Expansion Modules. The third
LCD Expansion Module does not have keys assigned until it is configured in LD 11. An error
message alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure two LCD Expansion Modules in LD 11 but four LCD Expansion Modules
respond, the TPS assigns the keys 32 to 55 to the first two LCD Expansion Modules. The fourth
LCD Expansion Module does not have keys assigned until it is configured in LD 11. An error
message alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure three LCD Expansion Modules but only one LCD Expansion Module responds,
the TPS assigns the keys 32 to 55 to the single LCD Expansion Module (using the Second
Page functionality). When a second then the third LCD Expansion Module is detected, the TPS
changes the key assignments to display across all three LCD Expansion Modules.
If you configure three Expansion Modules in LD 11 but two LCD Expansion Modules respond,
the TPS assigns keys 32 to 67 to the first two LCD Expansion Modules. An error message
alerts the administrator that the hardware configuration does not match the administered
configuration. When a third LCD Expansion Module is detected, the TPS changes the key
assignments to display across all three LCD Expansion Modules.
If you configure three LCD Expansion Modules in LD 11 but four LCD Expansion Modules
respond, the TPS assigns keys 32 to 67 to the first three LCD Expansion Modules. The fourth
LCD Expansion Module does not have keys assigned until it is configured in LD 11. An error
message alerts the administrator that the hardware configuration does not match the
administered configuration.
If you configure four LCD Expansion Modules but only one LCD Expansion Module responds,
the TPS assigns the keys 32 to 55 to the single LCD Expansion Module (using the Second
Page functionality). When a second, third, and fourth LCD Expansion Modules are detected,
the TPS changes the key assignments to display across all four LCD Expansion Modules.
If you configure four LCD Expansion Modules in LD 11 but two LCD Expansion Modules
respond, the TPS assigns keys 32 to 79 to the first two LCD Expansion Modules. An error
message alerts the administrator that the hardware configuration does not match the
administered configuration. When a third LCD Expansion Module is detected, the TPS changes
the key assignments to display across all three LCD Expansion Modules.
IP Deskphones Fundamentals February 2013 127