Configure The Https Settings - Panasonic WV-SF448 Operating Instructions Manual

16.2 Configure the HTTPS settings

Click the [Network] tab on the "Network" page. (®page 55, page 57)
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
When using the self-signed certifi cate
Generation of the self-signed certi ficate
Generation of the CRT key (SSL encryption key) (®page 166)
Generation of the self-signed certificate (®page 167)
Generation of CSR (Certificate Signing Request) (®page 169)
Installation of the server certificate (®page 170)
Configuration of the connection protocol (®page 171)
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the cameras using the HTTPS protocol
16 Configuring the network settings [Network]
When using the server certi ficate
Generation of CSR (Certi ficate Signing Request)
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Installation of the server certi ficate
A
B
C
D
E
Operating Instructions 165