Table of Contents
Advertisement
2.8.2.2 Configure the HTTPS settings
It is possible to enhance the network security by encrypting the access to cameras using the HTTPS function.
Refer to page 66 for how to configure the HTTPS settings.
[HTTPS - Connection]
Select the protocol used to connect the camera.
•
HTTP: HTTP and HTTPS connections are available.
•
HTTPS: Only the HTTPS connection is available.
•
Default: HTTP
Note
•
To change to an HTTPS connection when HTTP is selected, perform HTTPS connection settings first.
The HTTPS connection will be available even if the setting is changed to HTTP afterwards.
[HTTPS - HTTPS port]
Designate the HTTPS port number to be used.
•
Available port number: 1 - 65535
•
Default: 443
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000
[CRT key generate]
CRT key (SSL encryption key) used for the HTTPS protocol is generated. To generate the CRT key, click the
[Execute] button to display "CRT key generate" dialog box.
[CA Certificate - CA Certificate install]
Installs the CA certificate (Security certificate) issued by CA (Certificate Authority) and displays the information
of the installed CA certificate (Security certificate).
To install the CA certificate (Security certificate), click the [Browse...] button to display the [Open] dialog box,
and select the file of the CA certificate (Security certificate) issued by CA, and click the [Execute] button.
If the CA certificate is already installed, the file name of the installed CA certificate (Security certificate) will be
displayed.
2 Settings
Operating Instructions
63
Advertisement
Table of Contents
