Network Factory Default; Wired Lan Factory Default Settings - Christie L2K1000 User Manual

Network factory default

1. Select "Network factory default" in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings" as shown in the table below.

Wired LAN factory default settings

Parameter
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY ADDRESS
DNS ADDRESS
L2K1000 Network User Manual
020-00395-01 Rev.1 (04-2011)
Settings
Off
169.254.100.100
255.255.0.0
255.255.255.255
255.255.255.255
Network factory default
15