Amx D. D; Network Factory Default; Wired Lan Factory Default Settings - Christie LX1750 Network Manual

AMX D. D.

Select "AMX D. D." in the Network menu and press SELECT, select ON or OFF to allow the
projector to be detected by AMX Device Discovery.
For more details, visit http://www.amx.com/.

Network factory default

1. Select "Network factory default" in the Network menu and press SELECT.
2. A confirmation box appears and select "Yes" and then press SELECT.
3. Another confirmation box appears and select "Yes" and then press SELECT.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings" as shown in the table below.

Wired LAN factory default settings

Parameter
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY ADDRESS
DNS ADDRESS
LX1750 Network User Manual
020-000639-01 Rev.1 (11-2013)
Settings
Off
169.254.100.100
255.255.0.0
255.255.255.255
255.255.255.255
Network factory default
15