Transition Setting - RGBlink VENUS X1 User Manual

3.16 Transition Setting

Push the [MENU] button for two times, and enter to the transition function menus, transition
menu shown as follows:
->DEINTERLACE
->ALPHA
DEINTERLACE: Force Deinterlace function, select "ON" or "OFF".
ON: Force deinterlace.
OFF: No deinterlace.
IMAGE ENHANCE: Image enhancement function, for image edge sharpening, color reduction and
image scaling.
MODE: Special effects switching modes, including DISSOLVE, CUT, WIPE SQUARE IN, WIPE
SQUARE OUT, WIPE TOP LEFT IN, WIPE TOP LEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT,
WIPE BOTTOM LEFT IN, WIPE BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT
OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP
OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT.
FADE TIME: Switch time setting. Turn the rotary knob to select the fade time and push the knob
to confirm. The switching time ranges from 0 to 3S.
ALPHA: Set the image transparency, the adjustment range is 0 to 16.
VENUS X1
IMAGE ENHANCE
MODE
FADE TIME
User Manual
Chapter 3 : Using Your Product
ON
OFF
DISSOLVE
0.5s
16
53