Using The Menu; Understanding The Display - RGBlink VENUS X1 User Manual

3.3 Using the Menu

Use the menu system for convenient and intuitive operation. VENUS X1 OLED display shows the
menu items. The OLED display will show the default state when the menu is not in use, or the
operation has timed out. Using the MENU button and rotary knob in the front panel, the OLED
display will show the corresponding menus according to user selections.

3.3.1 Understanding the Display

Turn the power switch to the ON position, the OLED display will show the start-up interface and
show the default menu after completing initialization as below:
Introduce for the above information:
Input Signal
1 Shows the current Input signal that is selected. The related dedicated signal button
will be lit red.
Input Resolution
Show the current input resolution from the selected Input source. To configure input
2 resolutions, use the EDID Management features. A wide range of input resolutions
are supported depending the input – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being used.
IP address
3 Shows the IP address of the product.
When not displayed here, the serial number can be found via the
Recall
4
Show the current recall position.
Ethernet
5 Displays whether Ethernet connection is active or inactive. Ethernet settings are
available in the
Lock
6
Indicates if the front panel is locked.
VENUS X1
Ethernet menu.
User Manual
Chapter 3 : Using Your Product
SYSTEM menu.
18