RGBlink VENUS X1 User Manual page 35

(5) Connect Port D1 of No.1 Sending Card to LED screen, setting steps are as follows:
a. Turn the knob, and select <LED MANAGEMENT>:
b. Push the knob to confirm, turn the knob, select <SENDING CARD TYPE> in <QUICK
CONNECTION> option, push the knob to confirm, turn the knob, select the sending card
type, for example, select Linsn (VENUS X1 supports Linsn and Colorlight sender card, for
Nova sender card, it only support brightness and Gamma adjustment). Shown as follows:
c. Turn the knob, select <SENDING CARD NO.>, push the knob to confirm. Turn the knob and
select "No.1", push the knob to confirm. Shown as follows:
d. After setting, turn the knob, select <QUICK CONNECTION>, push the knob to confirm for
next setting, shown as follows:
VENUS X1
SYSTEM
->LED MANAGEMENT
LANGUAGE/语言
FACTORY RESET
->QUICK CONNECTION
ADVANCED
*SENDING CARD TYPE
SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
SENDING CARD TYPE
->SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
SENDING CARD TYPE
SENDING CARD NO.
OUTPUT FORMAT
->QUICK CONNECTION
User Manual
Chapter 3 : Using Your Product
>>
>>
ENG
>>
>>
>>
LINSN
No.2
>>
>>
LINSN
No.1
>>
>>
LINSN
No.1
>>
>>
34