Text Overlay Setting - RGBlink VENUS X1 User Manual

3.12 Text Overlay Setting

Before setting the text overlay, please make sure the input channel of the text. For example, set
VGA input as the text channel. Then make sure the channel that the text will overlay, for example,
overlay the text on DVI channel. The operations are as follows:
1. Push the VGA button to make sure there is VGA input.
2. Push the DVI button to make sure there is DVI input.
3. Push the [MENU] button, turn the rotary knob, select <PICTURE>, push the knob to confirm,
turn the knob, and select <TEXT OVERLAY>, push the knob to confirm.
Then enter into TEXT OVERLAY menu items, turn the knob, and select <TEXT OVERLAY>, push
the knob to confirm, turn the knob again, and select "ON" to enable the text overlay function.
4. Make sure VGA input is IMAGE B, and DVI input is IMAGE A, if not, select <SWAP WINDOW>
option by push [PIP/DSK] button, and select "ON" for <SWAP WINDOW>.
5. Select the VGA image in "IMAGE B" in <SELECT> option by pushing <PIP/DSK> button, and push
[SCALE] button to adjust the size and position of VGA image, then set the VGA image to the
required position.
VENUS X1
IMAGE QUALITY
->TEXT OVERLAY
*TEXT OVERLAY
PRESET
BLEND MODE
BLEND LEVEL
PIP
LAYOUT
SELECT
->SWAP WINDOW
关
->H SIZE
V SIZE
H/V SIZE
H POS
->V POS
RESET
User Manual
Chapter 3 : Using Your Product
>>
>>
ON
USER MODE
MODE1
0
ON
PIP L+T
IMAGE A
ON
1920
1080
0
0
0
47