RGBlink VENUS X1 User Manual page 38

(9) Turn the knob, select <RECEIVING CARD SET>, push the knob to confirm. Turn the knob again,
and select <CHOOSE CABLE>, push the knob to confirm. Turn the knob, select PORT U2 and
push the knob to confirm.
(10) Push the [MENU] to return the previous menu, select <SENDING CARD SET>, push the knob
to confirm, and enter to the next level menu, shown as follows:
(11) Turn the knob, and select <X>, set X as 360 (Note: X=HORIZONTAL CARD×WIDTH, in the
previous part, we set horizontal card as 3 and width as 120). Shown as follows:
VENUS X1
->SENDING CARD SET
RECEIVING CARD SET
SENDING CARD SET
->RECEIVING CARD SET
->CHOOSE CABLE
HORIZONTAL CARD
VERTICAL CARD
WIDTH
->SENDING CARD SET
RECEIVING CARD SET
->X
Y
SAVE TO SENDER CARD
RESET
User Manual
Chapter 3 : Using Your Product
>>
>>
>>
>>
PORT U
3
2
120
>>
>>
0
0
37