7.3 Installing Options
7.3.1 Installing Input Module
VENUS X1 is based on replaceable input optional modules structure, user can install or replace
the optional module according to actual need, the specific installation steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module block, as
shown in figure:
2. Fix the input EXT board and input modules on the plate with the fixed screws, as shown in
figure:
VENUS X1
Fixed screw of input
module
User Manual
Chapter 7: Appendix
Captive Screw
94