Chapter 4 Controlling Your Processor
Remotely
4.1 Using the Windows Control Program
Install the software
on a Windows computer, launch the application.
Connection
Besides the power cord, VENUS X1 equip with the RS-232 cable, DB9F cable, and RJ11 (6 B4C)
cable to connect to the windows control program.
If connect VENUS X1 to the windows control program with RJ11 cable, fill any number less than
1023 in local port, the remote host must be 192.168.0.100 and the remote port must be 1000.
After setting, click the icon
. If connect successfully, the icon will turn to
, and show
.
VENUS X1
User Manual
58