Connect Wifi - RGBlink VENUS X1 User Manual

7.4 Connect WIFI

1. Plug VENUS X1 into the power cord, and turn the power switch on the rear of the product to
the ON position.
2. Right click the wireless icon on the lower right corner, and select "Wireless Network
Connection", then select "VENUS-X1-0048", and click "Connect".
3. Install VENUS X1 windows control program
the desk after installation
interface.
4. Click the "Comm Setup" icon, as shown in the figure below:
5. It will pop up the comm settings widow, select "Wifi" and click "OK", as shown in the figure
below:
VENUS X1
, there will be a new shortcut icon on
, double click the shortcut icon, and enter to the software
User Manual
Chapter 7: Appendix
101