Chapter 6 Support; Questions And Troubleshooting; Input Jitter For I System Of Hdmi; Dvi Quick Split Operation - RGBlink VENUS X1 User Manual

Chapter 6 Support

6.1 Questions and Troubleshooting

6.1.1 Input Jitter for I System of HDMI

Frequently Asked
Input jitter for I system of HDMI
Question
Change the input as P system
Some HDMI input of VENUS X1 will jitter for the I system of HDMI, please
change the input as P system.
Troubleshooting
Connect the HDMI signal to the EXT_HDMI input
If user can't change the input format as P system, please connect the I
system signal to the EXT_HDMI input.

6.1.2 DVI Quick Split Operation

Frequently Asked
DVI quick split operation
Question
The split function of VENUS X1 is only available for DVI port (standard) and
HDMI loop out port of EXT_9.
It needs signal distributor if split by DVI port
If split by the standard DVI port, it needs the signal distributor to achieve the
synchronization cascade, as there is no DVI loop.
Split by the HDMI Loop Out Port of EXT_9
User can split by the HDMI loop of EXT_9, as there is loop out port on this
module.
Troubleshooting
Quick Split
Connect all the inputs and outputs, then push the [SPLIT] buttons on all the
video processors. Select fixed split or normal split, and open the split
function.
1. FIXED SPLIT: Set the horizontal split and vertical split according to actual
need.
2. NORMAL SPLIT: Set the H TOTAL, V TOTAL, H POS, V POS, H SIZE and V SIZE
according to actual need. User can do the quick split only need setting three
groups of the parameters.
VENUS X1 User Manual
81