Configuring The Forward Mode; Configuring Footer Printing; Selecting A Tray - Konica Minolta bizhub 225i User Manual

7
7.5.8

Configuring the forward mode

1
Press the Utility key.
2
Use the +/, key to select [FAX RX OPERATION], then press the OK key.
3
Use the +/, key to select [FORWARD], then press the OK key.
4
Use the +/, key to select [OFF], [ON], or [ON (PRINT)], then press the OK key.
% If [ON] or [ON (PRINT)] is selected, go to Step 5.
% If [OFF] is selected, the display returns to the fax RX settings menu.
5
Use the One-Touch Dial Key, speed dial, or Keypad to specify a fax number of a forward destination,
then press the OK key.
% An E-mail address can be specified as a forward destination. For details, refer to Web Connection
- [Address] - [Fax Configuration] of [User's Guide Network Administrator].
This returns to the fax RX settings screen.
7.5.9

Configuring footer printing

1
Press the Utility key.
2
Use the +/, key to select [FAX RX OPERATION], then press the OK key.
3
Use the +/, key to select [FOOTER], then press the OK key.
4
Use the +/, key to select [OFF] or [ON], then press the OK key.
This returns to the fax RX settings screen.
7.5.10

Selecting a tray

1
Press the Utility key.
2
Use the +/, key to select [FAX RX OPERATION], then press the OK key.
3
Use the +/, key to select [SELECT TRAY], then press the OK key.
4
Use the +/, key to select a target tray, then press the OK key.
5
Use the +/, key to select [DISABLE] or [ENABLE], then press the OK key.
This returns to the fax RX settings screen.
7-26
FORWARD
DESTINATION
SUB,SID SETTING
Fax RX setting 7.5
bizhub 225i