Relative Offset Commands - Keysight V3500A User Manual

Relative Offset Commands

Command Name
Description
Syntax
Command Name
Description
Syntax
Command Name
Description
Syntax
Command Name
Description
Syntax
Command Name
Description
Syntax
V3500A User's Guide
Set relative offset
This command sets a relative offset value.
SETREL<Value><LF>
Check for the relative offset value
This command checks for and returns the set relative offset
value.
RELVAL?<LF>
Turn relative offset on
This command sets the relative offset to ON.
RELON<LF>
Turn relative offset off
This command sets the relative offset to OFF.
RELOFF<LF>
Check status of the relative offset
This command checks the status of the relative offset. If it is
ON, a "1" is returned, and if it is OFF, a "0" is returned. If it
is in EDIT mode, a "2" is returned.
REL?<LF>
Driver Installation and Commands 3
59